Installing Raspbian in Raspberry Pi 3 B Without HDMI | Getting Started With Raspberry Pi 3B | Setting Up Your Raspberry Pi 3

Uncategorized

As some of you guys know Raspberry Pi computers are quite awesome and you can get the whole computer just on a single tiny board .

The Raspberry Pi 3 Model B features a quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz. This puts the Pi 3 roughly 50% faster than the Pi 2. Compared to the Pi 2, the RAM remains the same – 1GB of LPDDR2-900 SDRAM, and the graphics capabilities, provided by the VideoCore IV GPU, are the same as they ever were. As the leaked FCC docs will tell you, the Pi 3 now includes on-board 802.11n WiFi and Bluetooth 4.0. WiFi, wireless keyboards, and wireless mice now work out of the box.

Raspberry Pi 3 Specifications

SoC: Broadcom BCM2837
CPU: 4× ARM Cortex-A53, 1.2GHz
GPU: Broadcom VideoCore IV
RAM: 1GB LPDDR2 (900 MHz)
Networking: 10/100 Ethernet, 2.4GHz 802.11n wireless
Bluetooth: Bluetooth 4.1 Classic, Bluetooth Low Energy
Storage: microSD
GPIO: 40-pin header, populated
Ports: HDMI, 3.5mm analogue audio-video jack, 4× USB 2.0, Ethernet, Camera Serial Interface (CSI), Display Serial Interface (DSI)

Things you need

Raspberry pi 3 b Buying link :(8% off coupon – NEWSP8 ) :- https://www.banggood.in/Raspberry-Pi-3-Model-B-ARM-Cortex-A53-CPU-1_2GHz-64-Bit-Quad-Core-1GB-RAM-10-Times-B-p-1041862.html?p=LU070313923481201709&custlinkid=178030

Raspberry pi 3 b+ Buying link :
https://www.banggood.in/Raspberry-Pi-3-Model-B-Mother-Board-With-BCM2837B0-Cortex-A53-ARMv8-1_4GHz-CPU-p-1278398.html?p=LU070313923481201709&custlinkid=178050

Micro SD Card:
https://www.banggood.in/Mixza-Year-of-the-Dog-Limited-Edition-U1-32GB-TF-Memory-Card-p-1295486.html?p=LU070313923481201709&custlinkid=178043

https://www.banggood.in/MIXZA-Shark-Edition-Memory-Card-32GB-Micro-SD-Card-Class10-For-Smartphone-Camera-MP3-p-1060297.html?p=LU070313923481201709&custlinkid=178045

SD card Reader :
https://www.banggood.in/STMAGIC-TC100-USB-High-Speed-480-Mbps-TF-Card-Memory-Card-Reader-p-1122264.html?p=LU070313923481201709&custlinkid=178046

USB Power Cable :
https://www.banggood.in/BlitzWolf-BW-MC14-Micro-USB-Charging-Data-Cable-5_9ft1_8m-For-Samsung-S7-S6-Xiaomi-Redmi-Note-5-p-1339803.html?p=LU070313923481201709&custlinkid=178047

Power Bank supply :
https://www.banggood.in/Bakeey-2_1A-Dual-USB-Ports-10000mAh-Fast-Charge-Power-Bank-Case-DIY-Box-With-Flashlight-p-1343253.html?p=LU070313923481201709&custlinkid=309982

Then after getting all this above stuff you need to download the softwares given below:

Download: – SD card formatter
https://www.sdcard.org/downloads/formatter_4/

Download: – Etcher software
https://etcher.io

Download: – Raspberry Pi OS
https://www.raspberrypi.org/downloads/raspbian/

Download: – Notepad ++
https://notepad-plus-plus.org/download/v7.5.8.html

Download: – Putty software
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html

Since after downloading all these softwares, make sure you install all (except Raspbian OS ) on your PC.

So then connect SD card to PC and format it.

Then open the Etcher Tool and select the Raspberry Pi image and select your SD card and hit Flash and after few minutes your OS will be flashed on your SD card.

After Flashing the image plug your SD card into PC again and open it and
and save this file too, then create another file in the SD card and rename it as “ssh” and save it with no extensions.

then make one more file here named as : wpa_supplicant.conf

and type the below text in file

country=us

update_config=1

ctrl_interface=/var/run/wpa_supplicant

network={

 scan_ssid=1

 ssid=”******”

 psk=”*******”

}

enter your ssid and pass then save the file and plug sd card in RSP Pi.

connect the USB cable into mini USB port of pi
and your pi will start to boot which will be indicated by yellow/green/red LED on it.

Download any IP scanner app as i am using my mobile hotspot i am using WOM Wifi app and you can see the IP of RSP pi here, you can use any IP scanner app on android or windows but make sure your devices is connected to wifi.

you can see IP of my Pi here.

Then open Putty software and in the Hostname type the IP of pi then click open and a new window will pop up.

And in the new window you just need to type the Login as : “pi” and the password will be “raspberry” and hit enter and you’ll be logged into Pi.

So now you can execute your commands from this shell window, you can enable WiFi, get  the IP of Pi and installing new features you can do that from this window and if want more information regarding this post then watch the video given below it will not only tell you  this whole process in detail but few additional commands and things about Raspberry pi, so if have queries or issues then let me know.

5 thoughts on “Installing Raspbian in Raspberry Pi 3 B Without HDMI | Getting Started With Raspberry Pi 3B | Setting Up Your Raspberry Pi 3

  1. This blog is definitely rather handy since I’m at the moment creating an internet floral website – although I am only starting out therefore it’s really fairly small, nothing like this site. Can link to a few of the posts here as they are quite. Thanks much. Zoey Olsen

Leave a Reply

Your email address will not be published. Required fields are marked *